Used equipment for scrap processing & recycling

Positions 40' Containers @ 90 deg.
Can also load 20' Containers

RSN: 25195

Description: New Approx 2005
Scale
Per factory literature:
Safety: The A-Ward 90º Container Tilter allows containers to be removed from trailers and tilted from horizontal to 90º angle safely from a distance. At a full 90º tilt the container can be filled with up to 30 tons of product, safely from a distance.
Extra safety locks: All four cylinders are fitting with pressure control safety lock valves in case of hydraulic failure. Both front and rear container locks have two locking points on each side.
Adjustment: The dual ram design allows trailer height variation at deck height of 43” to 54” above ground. The adjustable wheel guides allow for a variation of the trailer wheels’ outside dimensions of 95” to 101”.
Productivity: The loading angle of the container can be altered as product height is increased, this improved control increases loading productivity and safety as well as maximizing product loading weights.
Simple Control: With a remote operator control unit, the tilting operation can be done safely from a distance with no chains or off-center loads. The feathering control levers aid with fast container alignment.
Self Contained: Has a13hp petrol engine, a 3000psi hydraulic pump and oil reservoir and an optional battery starter.
Container Support: At the 90º fully tilted angle the base of the container is fully supported on each of its corners for minimal container damage.

Manufacturer: