Sold

Prab Used Vertical Crusher, Chip Wringer, and Conveyors System

Processing Lines
Manufacturer:
PRAB
Model:
UNASSIGNED
Year:
2013
Stock #:
32111
Diagonal Shaft Chip Wringer - System New in 2013 w/ Prab Low Level Cart Dumper

System Includes:
- HAC(Horizontal Axis Crusher) w/ infeed and discharge conveyors
- Prab Low Level Cart Dumper:
+ Receiving Frame to receive up to 28"x42"L Carts
+ LIft Capacity 2,500 lbs
+ Controls mounted on dumper
+ Hydraulic relief valve prevents overloading
+ T-Rail interlocks
- Prab Minisystem Chip Processor System:
1) Feed Conveyor - Screw Conveyor:
+ 9" Diameter Screw with flared trough design
+ 3/16" Formed Steel
+ Inlet hopper skirt can be situated to receive hoppers from one of three sides
+ 3/4 HP, TEFC motor driving a speed reducer
+ Air Valve with timer gives drainage screen in hopper a periodic blast of air to prevent screen from clogging
+ Drip pan construced of 10 gauge H.R.S
+ Large capacity infeed hopper, removable top cover and discharge chute.
2) Diagonal-Shaft Chip Wringer - Model 16-CD
+ Externally mounted, standard 7 1/2 HP, T-frame motor
+ Standard double V-belt, and sheaves
+ (6) vane bowl and A.R. Steel accelarator vanes
+ Coolant/oil separation SS screen, self cleaning
+ Impact Ring
+ Heavy duty pillow block bearings
+ Wringer mounted on heavy-duty isolation pads and HD structural steel legs
+ Discharges directly into Distribution conveyor
3) Wringer settling tank w/ fines recirculating drag:
+ 50 gallon capacity
+ Air Diaphragm pump
+ 1/2 HP drive assembly
4) Minisystem Frame and Covers:
+ Frame mounted unit can be moved with forklift
+ Covers enclose system for unified appearance
5) Control Panel:
+ Nema 12 enclosure with main panel disconnect with PLC and rated contactor and motor protection
+ Touch screem HMI
+ No-rotation device to work with system interlock
+ Power supply 480/3/60
6) Discharge Conveyor:
+ 18" wide side frame
+ Totally enclosed frame with A.R. Track w/ Bracing
+ 1/4" Thick A.R. Steel carry surface
+ Enclosed in-feed hopper
+ 1 HP TEFC motor and gear reducer
this system also includes:
Support sand w/casters as well as fifteen (15) LL-96 chip carts on casters and four (4) HW-134 carts w/casters.
The Crusher comes with in-fed and discharge conveyors

Loading...
Loading...
Loading...
Loading...